Planar DOME Md4/PCI Installation Manual page 116

100 Chapter 3
res="1728x2304 @ 69Hz"
This line indicates that your monitor's resolution (pread-
justed timing name) is 1728x2304 @ 69Hz.
When modifying the line, be sure to use the exact
res
name for your monitor from the "Preadjusted Timing
Name" column in the Resolutions and Refresh Rates table
on page 138.
monitor="domegray.vda"
This line indicates that you are using a grayscale monitor,
and the preadjusted timing name is located in the monitor
file .
domegray.vda
Monitor files are located in the
/opt/DOMEmd4pci/\
directory. Do not modify these files unless
monitors
DOME Customer Support advises you to do so.
To support a color monitor, use in
"domecolr.vda"
place of
"domegray.vda."
board="md4pci-2hd.xqa"
This line indicates that you are using two heads ( ) of
-2hd
an Md4/PCI board ( ), and that the board configura-
md4pci
tion is located in the board file, .
md4pci-2hd.xqa
Board files are located in the
/opt/DOMEmd4pci/boards
directory. Do not modify these files.
See the second code sample on page 98 for configuration
for the second head, and the third code sample for configu-
ration for a one-headed system driving a color monitor.
Both heads of the same board must use the same
resolution.