Planar DOME Md4/PCI Installation Manual page 30

14 Chapter 2
Static gray palette
The static gray palette provides 256 shades of gray in a static
palette. This frees the entire grayscale ramp for applica-
tions by not reserving the first and last 10 palette entries for
icons and other standard Windows graphics.
Calibration with the static gray palette
To run the DOME calibration software with the static gray
palette, you need either Luminance Calibration System 1.5
or later, or Calibration TQA 2.0 or later software.
Sync on Green
Click Sync on Green to set the Sync on Green option.
If your monitor is set for this option, select Sync on Green.
Refer to your monitor manufacturer's recommendations
for more information.
Disabling DirectDraw
DirectDraw is an Application Program Interface (API) that
allows direct manipulation of the video display. You can
disable DirectDraw by selecting the Disable DirectDraw
option on the DOME tab.
If you are using software, such as the DIMPL library, that
uses the DirectDraw facilities of the Windows 95 operat-
ing system, you may not want to disable this option.