Planar DOME Md4/PCI Installation Manual page 85

Installing the Md4/PCI Board in a PC
To set monitor preferences
To enable Pedestal, select Pedestal on the DOME tab. Refer
to your monitor documentation for more information.
To set driver options
To disable DirectDraw, select Disable DirectDraw on the
DOME tab.
Setting palette options
DOME palette options must coordinate with the primary
display. All monitors must be set to either palette devices or
non-palette devices.
Palette Device
Dynamic gray
Color palette
a. Color options available for flat-panel
displays.
Palette Options
Non-Palette Device
Static gray
a
Nonlinear static gray
a
True color
69