Setting Switch S1 To Disable Vga Mode - Planar DOME Md4/PCI Installation Manual

Installing the Md4/PCI Board in a Sun PCI Workstation

Setting switch S1 to disable VGA mode

The Md4/PCI board cannot operate as a VGA board in a
Sun PCI workstation. To disable VGA on the Md4/PCI
board, slide the DIP switches on switch S1 to the positions
shown in this table.
DIP Switch Settings on
Switch 1 to Disable VGA
DIP Switch Position
1 OFF
2 OFF
3 OFF
4 ON
87