Configuring Display Settings - Planar DOME Md4/PCI Installation Manual

Installing the Md4/PCI Board in a Sun PCI Workstation
Configuring Display Settings
Before you configure your system for the Sun Common
Desktop Environment (CDE) or OpenWindows, you need
to set the monitor mode for your board. DOME provides a
default monitor mode that you can either use or override.
Read the following sections before you configure CDE or
OpenWindows:
• Using the Default Monitor Mode (page 96)
• Overriding the Default Monitor Mode (page 98)
• Using Visual Classes (page 102)
Then read the appropriate section for your windowing
environment:
• To run OpenWindows (page 106)
• To configure CDE (page 107)
95