Connecting The Monitors; To Connect Grayscale Monitors - Planar DOME Md4/PCI Installation Manual

Installing the Md4/PCI Board in a Digital UNIX Workstation

Connecting the Monitors

When the Md4/PCI board is installed in your system,
connect the monitors to the board with the cable provided.
Grayscale cables have two branches, each with three con-
nectors. Color cables have one branch with five connectors.

To connect grayscale monitors

Use these tables to attach the cables to the appropriate
output signals on your grayscale monitors.
If you are using only one monitor, use the Monitor 1
configuration settings.
Cable Label
VSYNC1
HSYNC1
Cable Label
VSYNC2
HSYNC2
Monitor 1 Configuration
Output Signal
VIDEO1 Monitor 1 video
Monitor 1 vertical sync
Monitor 1 horizontal sync
Monitor 2 Configuration
Output Signal
VIDEO2 Monitor 2 video
Monitor 2 vertical sync
Monitor 2 horizontal sync
129