To Finish The Installation - Planar DOME Md4/PCI Installation Manual

Installing the Md4/PCI Board in a PC
9. Install the DOME board in your computer. Follow the
instructions in "Installing the Board in a PC" on
page 22 and "Connecting the Monitors" on page 31.
After installing the board, you can set display
properties. See "Configuring Display Settings in
Windows 95" on page 10 for instructions.

To finish the installation

1. Turn on your computer.
The New Hardware Found and System Settings
Change dialog boxes appear.
2. Click Yes to restart your computer and finish the
Windows 95 Driver installation.
If a hardware conflict occurs or the system detects the
Md4/PCI board as a Number Nine™ Imagine 128™
[Cirrus Logic] board after you restart, see "Trouble-
shooting Tips for Windows 95" on page 20.
9