Planar DOME Md4/PCI Installation Manual page 105

Installing the Md4/PCI Board in a Sun PCI Workstation
5. Position the board's backplate into the opening at the
back of the computer.
Installing an
Md4/PCI board
6. Make sure the board's connectors are aligned with the
connectors on the motherboard.
7. Press down until the board is firmly seated.
Installed
Md4/PCI board
8. Secure the board with the screw for the backplate.
9. Replace the system unit cover.
10. Turn on your workstation, and boot up with the
option.
89
-r