Planar DOME Md4/PCI Installation Manual page 81

Installing the Md4/PCI Board in a PC
To set the resolution and refresh rate for the
sister display
1. Right-click the desktop, and select Properties ->
Settings tab.
2. Click the Display list and select the desired sister
display.
3. Click Advanced -> Adapter tab -> List All Modes
button.
4. Select the same resolution and refresh rate you used
for the first DOME screen for the sister display, and
click OK.
Set the resolution and refresh rate on the first DOME
screen and the second DOME screen of a dual-headed
DOME display board to identical values; otherwise,
one screen appears garbled.
5. Click Apply -> OK from the Default Monitor and
Md2/PCI, Md4/PCI, Md5/PCI, or Md8/PCI
Properties dialog box.
6. Select Extend my Windows desktop to this monitor
and click Apply.
The Display Properties dialog box appears.
7. Click Identify on the Settings tab to check whether the
sister displays are enabled.
When you click Identify, the screen numbers display on
the enabled screens.
See the next section to configure the display settings for
your enabled Windows 2000 displays.
65