Installing The Board In A Sun Pci Workstation; To Unpack The Board - Planar DOME Md4/PCI Installation Manual

86

Installing the Board in a Sun PCI Workstation

This section explains how to unpack and install the
Md4/PCI board in a Sun PCI workstation.
If you do not properly install the board, you may be
unable to restart your computer. Read and follow the
procedures in this section carefully.

To unpack the board

Remove the Md4/PCI board from its package and from its
protective sleeve, being careful to guard against static dis-
charge to the board.
Static electricity can damage the board. When touching
the board or parts of the motherboard, take these
precautions:
• Wear an antistatic wrist strap.
• Always keep one hand touching a metal surface to
provide grounding.
• If you can't perform a step with one hand, use both and
return one occasionally to the bare metal surface.
Chapter 3