To Set Custom Syncs - Planar DOME Md4/PCI Installation Manual

Installing the Md4/PCI Board in a PC 73

To set custom syncs

To set custom syncs, right-click the desktop, and select
Properties -> Settings tab -> Advanced -> DOME tab ->
Custom Mode.
The Custom Mode dialog box appears.
The Custom Mode dialog box enables you to do the
following:
• Customize modes
• Create modes
• Remove modes
• Restore original modes (configuration file)
The mode changes you make are stored in a file, and
.dom
the driver loads the file at boot time. See "Restoring
.dom
the original modes" on page 76 for more information.