Planar DOME Md4/PCI Installation Manual page 48

32
2. Attach each output cable to the appropriate BNC
terminal on your monitor. Refer to the monitor docu-
mentation for more information.
Connecting the
cable to a
grayscale monitor
The cable labeling in the illustrations above applies to
the DOME Md4/PCI cable. If you are using a cable
from another source, the cable labeling may differ.
3. Repeat step 2 for each monitor that you want to connect
to the Md4/PCI board.
Connecting the
cable to a
color monitor
Chapter 2