Overriding The Default Monitor Mode; To Override The Default Monitor Mode - Planar DOME Md4/PCI Installation Manual

98

Overriding the Default Monitor Mode

To start CDE or OpenWindows using the default monitor
mode, skip this section.
To override the default monitor mode and customize your
configuration for either CDE or OpenWindows, you must
edit the
This file is located in the
directory on the workstation.

To override the default monitor mode

1. Check to see if the
OWconfig
not, you must log in as
directories with
2. Find these lines of the
/usr/openwin/server/etc
#class="name="DOMEmd4pci0Config"
#
#
#
#
#class="XSCREENCONFIG" name="DOMEmd4pci1Config"
#
#
#
#
#class="XSCREENCONFIG" name="DOMEmd4pci2Config"
#
#
#
#
file.
OWconfig
/usr/openwin/server/etc
/etc/openwin/server/etc/\
directory exists on your workstation. If
.
mkdir
OWconfig
device="/dev/md4pci0.0"
res="1728x2304@ 69Hz"
monitor="domegray.vda"
board="md4pci-2hd.xqa";
device="/dev/md4pci.1"
res="1728x2304 @ 69Hz"
monitor="domegray.vda"
board="md4pci-2hd.xqa";
device="/dev/md4pci.0"
res="2048x2048 @ 60Hz"
monitor="domecolr.vda"
board="md4pci-1hd.xqa";
and create the missing
root
file in
, and make a copy of them:
Chapter 3