Installing the Md4/PCI Board in a PC
The Install From Disk dialog box appears, containing
this field:
Copy manufacturer's files from:
A:\
7. Insert the DOME Windows NT 4.0 Drivers for
Mdx/PCI diskette in your computer's disk drive.
8. If you inserted the diskette in the A drive, click OK.
If you inserted the diskette in another drive, type:
X:\
where:
X
The Change Display dialog box appears, with these
choices:
DOME imaging systems Md2/PCI
DOME imaging systems Md4/PCI
DOME imaging systems Md5/PCI
DOME imaging systems Md8/PCI
9. Select Md4/PCI and click OK.
The Third-party Drivers dialog box appears,
prompting you:
Do you wish to proceed?
10. Click Yes.
A progress bar appears, followed by the Installing
Driver dialog box with this message:
The drivers were successfully installed.
11. Click OK.
12. Click Close on the Display Type dialog box and then on
the Display Properties dialog box.
represents the drive.
35