Planar DOME Md4/PCI Installation Manual page 113

Installing the Md4/PCI Board in a Sun PCI Workstation
To program the default mode
You can use a monitor controlled by another display board
in your system to program the default monitor mode for
your Md4/PCI board.
Mode
A
E
F
G
I
M
Use the
monitor mode. For example, if you want to program mode
E on the first board in the system, type this command:
video_mode -d /dev/md4pci0.0 -m E
Monitor Modes
Resolution
(width x height) Refresh Rate Color Mode
1728 x 2304 pixels
1200 x 1600 pixels
1200 x 1600 pixels
1600 x 1200 pixels
1280 x 1024 pixels
1024 x 768 pixels
command to program a new default
video_mode
69 Hz Grayscale
76 Hz Grayscale
66 Hz Grayscale
66 Hz Grayscale
76 Hz Color
70 Hz Color
97