Planar DOME Md4/PCI Installation Manual page 80

64
6. Select Display Adapters, and click Next.
The Select a Device Driver dialog box appears.
7. Select DOME imaging systems in the Manufacturers
column and DOME Md4/PCI in the Models column.
Click Next.
The Start Hardware Installation dialog box appears.
8. Click Next.
The Digital Signature Not Found dialog box appears.
9. Click Yes to copy the display driver files.
10. Insert the DOME Windows 2000 driver diskette into
drive A and click OK.
The Completing the Add/Remove Hardware Wizard
dialog boxes appear.
11. Click Finish to complete the installation.
12. Return to the Display Properties dialog box.
Chapter 2