Installing The Board In A Pc - Planar DOME Md4/PCI Installation Manual

22

Installing the Board in a PC

This section explains how to unpack and install the
Md4/PCI board in a PC.
You must install the Windows 95 driver before you install
the Md4/PCI board. You can install drivers for other Win-
dows operating systems after you install the board. If you
do not properly install your Md4/PCI board and driver,
you may be unable to restart your computer.
Use this table to find installation instructions for the driver
for your operating system.
To install a driver
for this operating
system...
Windows 95
Windows NT 4.0
Windows 2000
Driver Installation
See this section...
"Installing the PCI Windows 95 Driver" on
page 8
"Installing the PCI Windows NT 4.0 Driver"
on page 34
"Installing the PCI Windows 2000 Driver" on
page 59
Chapter 2