Planar DOME Md4/PCI Installation Manual page 73

Installing the Md4/PCI Board in a PC
You can create as many as four distinct periods
throughout the day, with different DPMS settings for
each period.
3. Set the start time in the Starting at: field.
Use a 24-hour time format; for example, use 16:30
to indicate 4:30 p.m. This determines if or when
power-off mode will be invoked for up to four
different periods of the day.
A period ends when the next period starts.
You can leave the start time for a period blank if you
don't want to use it.
4. Enter the number of minutes of additional inactivity
(after the first screen saver launches) until the monitor
is placed in power-off mode in the Invoke DPMS after:
field.
5. If desired, select Wake at start of period to force the
monitor to wake up if it is in power-off mode at the
start of the period.
6. If desired, select Never sleep during this period to
prevent a switch to power-off mode during the period.
7. Click OK to keep your settings or Cancel to discard
them.
The Display Properties dialog box appears.
8. Click OK.
57