Planar DOME Md4/PCI Installation Manual page 110

94
where
For example, for version 1.2.0, type:
pkgadd -d md4p120.pkg
This message appears:
The following packages are available:
1 DOMEmd4p
2 DOMEmdlib DOME MD library (sparc) 1.0.x
Select package(s) you wish to process
(or 'all' to process all pack-
ages).(default:all) [?,??,q]:
5. Press <Return> to install all packages or the number 1
(one) to install the
Messages appear, followed by this prompt:
Do you want to continue with the installation
6. Type y.
Messages describe the progress of the installation. Then
these messages appear:
Installation of <DOMEmd4p> was successful.
Installation of <DOMEmdlib> was successful.
You do not need to reboot your system unless you did
not boot it with the
board. See page 89.
is the version number.
ZZZ
DOME Md4PCI Display Support
(sparc) 1.2.x
DOMEmd4p
of the package [y,n,?]
-r
package only.
option after you installed the
Chapter 3