Color Balance - Planar RPS User Manual

Color Balance

Command Description
BACKLIGHT. LCD Backlight 1424 =?+-
OFFSET Offset
COLOR.TEMP Color 1510 =?
Temperature
GRAY.BALANCE. Color Balance - 1504 =?
GAMMA Gray
RESET.BALANCE Color Balance 1506 !
Reset
WALL.RGB.GAIN LED RGB Gain 611 =?
Values
WHITE.BALANCE White Balance 1525 =?
Setting
Planar RPS and Video Controller RS232 User Guide
020-1332-00I
Modifiers Operands
PN# -100..100
0=ALL
PN# or integer 0=3200K
NONE is all 1=5500K
2=6500K
3=8500K
4=9300K
5=NATIVE
6=CUSTOM
Panel ID 1.8 .. 2.6
....and....
0=RED
1=GREEN
2=BLUE
255=ALL
0=RED 0.000 THRU 100.000
1=GREEN
2=BLUE
255=ALL
Panel ID 0.0 - 100.0
....and....
0=RED
1=GREEN
2=BLUE
255=ALL
Example
BACKLIGHT.OFFSET(3)=10 Gets / sets panel backlight offset values for
BACKLIGHT.OFFSET(3):10 brightness matching of LCDs.
COLOR.TEMP? Gets / sets wall color temperature. Note:
COLOR.TEMP=8500K 5500K and NATIVE is for LCD product only
and 9300K is for LED product only. To set a
custom color temperature for LED, it must
be set through the Planar Control Software
interface. A @NAK return indicates all
panels are not set the same.
GRAY.BALANCE.GAMMA(1 red)? Gets / sets the gray balance value (gamma)
GRAY.BALANCE.GAMMA(1 for the given LCD and color channel.
RED):2.200000
RESET.BALANCE Resets the color balance of all LCDs back to
RESET.BALANCE:@ACK the last saved state
WALL.RGB.GAIN(RED)? Gets / sets the red, green and blue gain
WALL.RGB.GAIN(RED):100 settings for the wall. This command applies
to LED open pixel architectures only.
WHITE.BALANCE(1 RED)? Gets / sets the white balance value for the
WHITE.BALANCE(1 RED):100.000000 given LCD and color channel
RS232 Codes
Notes
No 4.0 Yes No
No 4.0 Yes No
No 4.0 No No
No 4.0 No No
No 8.0 No No
No 4.0 No No
Page | 15