Ptz; Ptz Control Interface Introduction - Speco N8NRE User Manual

PTZ

6.1 PTZ Control Interface Introduction

You can control an IP dome or PTZ connected to the IP camera for PTZ control.
Click on the tool bar at the bottom of the live preview window to go to the PTZ control interface as shown below.
The direction, zoom, focus, iris and speed can be controlled in the small PTZ control window.
Right click the PTZ/speed dome camera window and select "PTZ Control" to go to the PTZ control panel as shown below.
Introductions of the buttons on the bottom right of the interface:
➢
Analog Joystick Control
The analog joystick on the left side of the interface provides quick PTZ control. The dome or PTZ will rotate when you drag the analog joystick. The
farther you drag the analog joystick from the middle of the image, the faster the dome or PTZ rotates. The dome or PTZ will stop rotating when you
6 PTZ
Button
Click /
to rotate the dome. Click
Click /
Click /
Click /
Drag the slider to adjust the rotating speed of the dome.
/ Click /
/
Click /
Click it to return to the live view interface.
Meaning
/ / / / /
to stop rotating the dome.
to zoom in / out the camera image.
to increase / decrease the focal length.
to increase / decrease the iris of the dome.
to start / stop recording.
to hide / show the analog joystick.
26
NVR User Manual
/