General Event Management
NVR User Manual
11.6.6 Digital Deterrent
Click Start→Settings→ AI/Event →Event Notification→Digital Deterrent to go to the interface as shown below.
Camera audio settings:
You can set voice broadcast up for perimeter alert cameras. Select the camera, voice, broadcast times, volume, and language and then click "Apply"
to save your settings. When an alarm is triggered, the camera will broadcast the voice you set.
Voice: click "Add" to add the alarm voice in WAV format. Click "Listen" to listen to the uploaded audio.
Click "Audio Device" to set the audio of the camera.
Select the camera and then click "Enable" next to audio device.
Audio IN Device: Please select according to the actual device configuration.
Input Volume: Set the audio input volume as needed.
Speaker (built-in): Please select its function as needed.
LOUT (Line Output): Select the function of the external audio device as needed.
Audio Out Volume: Set the audio output volume as needed.
Audio IN Encode: Select G711A or G711U
Local Audio Alarm
Set the audio alarm of the local NVR.
85