E-Mail Configuration - Speco N8NRE User Manual

Device Management
selected DDNS name is invalid or taken, please select another domain name. Click on test to confirm if the DDNS Domain is OK. If so, you may now go
to [your domain name].specoddns.net with a browser and access your recorder remotely.

14.1.5 E-mail Configuration

Click Start→Settings→Network→E-mail to go to the interface below. Enter the sender's name, e-mail address, SMTP server and SMTP port (you can
click "Default" to reset the SMTP port to the default value) and then enable or disable the SSL and attaching image.
Attaching Image: Choose "NO", "A Picture" or "Multiple Pictures". If "A Picture" or "Multiple Pictures" is selected, snapshot image or original image
can be selected to attach.
Select the username (the username list will be updated automatically according to the email address you input) and enter the password of the sender
and then click "Apply" to save your settings (you don't have to enter the username and password if "Anonymous Login" is enabled). Click "Test" to
open a window. Enter the e-mail address of the recipient in the window and then click "OK." The e-mail address of the sender will send an e-mail to
the recipient. If the e-mail is sent successfully, it indicates that the e-mail address of the sender is configured correctly.
Click "Edit Recipient" to go to the following interface:
Click "Add" and then enter the recipient's e-mail address and select the schedule (if a schedule is selected, the system will send the alarm email and
the recipient will receive it only in the selected schedule time) in the popup window. Click "Add" in the window to add the recipient. You can also
change the recipient's receiving schedule by clicking
save your settings. Click "Edit Sender" to go to the e-mail configuration interface of the sender.
in the "Schedule" column. Click
100
NVR User Manual
to delete the recipient in the list. Click "Apply" to