Schedule Settings - Speco N8NRE User Manual

Record & Disk Management NVR User Manual
Video Encode: the available options will be H.265 and H.264 depending on what the camera supports.
Resolution: the higher the resolution is, the clearer the image is.
FPS: the higher the frame rate is, the more fluency the video has, with the tradeoff of using more storage.
Bitrate Type: CBR and VBR are optional. CBR means that no matter how much change is seen in the video scene, the compression bitrate will be
kept constant. VBR means that the compression bitrate will be adjusted according to scene changes. For example, for scenes that do not have
much movement, the bitrate will be kept at a lower value. This will help to optimize the network bandwidth.
Quality: When VBR is selected, you need to choose image quality. The higher the image quality you choose, the more bitrate will be required.
Max Bitrate: 32Kbps ~10240Kbps are optional.
GOP: Group of Pictures.
➢
Scheduled Mode
If scheduled mode is selected, you need to set the recording schedules for each camera. See 7.1.2 Schedule Settings for details.

7.1.2 Schedule Settings

➢
Add Schedule
Click Start→Settings→Record→Mode Setting to go to the mode setting interface. Then select "Scheduled" mode and click "Schedule
Management" to set the schedule as shown below. "24 ⅹ 7", "24 ⅹ 5" and "24 ⅹ 2" are the default schedules; you cannot edit or delete "24 ⅹ 7"
while "24 5" and "24 2" can be edited and deleted. Click the schedule name to display the detailed schedule information on the left side of the
ⅹ ⅹ
interface. The seven rows stand for the seven days in a week and each row stands for 24 hours in a day. Blue stands for the selected time and gray
stands for unselected time.
Click "Add" to add a new schedule. Refer to the picture below.
35