Speco N8NRE User Manual page 75

Intelligent Analytics
① Enable the Plate Detection function (See 9.2.1 License Plate Detection Settings for details).
Once enabled, you can see the captured plates displayed in the live view interface shown below:
Put the cursor on the captured plate picture and then click
Click to view the captured detail information. Click
information in this interface. Click
② Enable the License Plate Recognition function and set the alarm linkage items (see 9.2.3 License Plate Recognition Settings for details).
③ Go to the live view interface and click
detection interface shown below. When a plate is captured, it will be displayed on the right panel. A strange plate will show "Strange plate" under
the plate picture.
to register this plate as shown below:
to quickly enter the vehicle search interface. You can search the matched plate
to go to the smart playback interface.
on the top right corner. Next, choose the Target Detection tab to go to the multi-channel target
70
NVR User Manual