Speco N8NRE User Manual page 68

AI Event Management NVR User Manual
⑥ Click "Apply" to save your settings.
⚫
Human/Motor Vehicle/Non-Motor Vehicle Counting
The information of human/motor vehicle/non-motor vehicle can be calculated and sent by day, by week and by month, so that you can receive and
analyze these statistics on time.
Only some IPCs support this function. If your camera doesn't support this function, please skip the following instructions.
① Click Start→Settings→AI/Event→AI Event→Target Counting to go to the following interface:
② Enable line crossing counting.
③ Set the schedule.
④ Drag the mouse on the small window to draw the line you want crossed. Click "Clear" to delete the alert line.
Direction: A->B and A<-B are optional. It is the direction of the target that crosses over the alert line.
⑤ Check "Statistical OSD" and the statistical information will be displayed on the live view interface.
⑥ Set the reset information. You can set reset information manually or enable "Auto Reset" as needed.
⑦ Click the "Detection Target" tab to set the detection target, including people, vehicles (Cars, trucks, etc.) and non-vehicles (bicycles, Motorcycles,
etc.).
⑧ Click "Advanced" to open the window below. You can select "Original picture" or "Target picture".
63