Edit Permission Group; Block And Allow List; Preview On Logout - Speco N8NRE User Manual

Account & Permission Management

13.3.2 Edit Permission Group

Go to the "Edit Permission Group" interface and then click
Group" are similar to that of the "Add Permission Group", please see 13.3.1 Add Permission Group for details). Click
group. Click to delete the permission group. The three default permission groups ("Administrator", "Advanced" and "Common") cannot be
deleted.

13.4 Block and Allow List

① Click Start→Settings→Account and Authority→Security to go to the following interface:
② Check "Enable" and then choose "Enable Allow List" or "Enable Block List" (a PC client with an IP address in the allow list can access the NVR
remotely while a PC client in the block list cannot).
③ Add IP/IP segment/MAC. Click "Add IP" or "Add MAC" button and then check "Enable" in the popup window (it must be checked for the IP/IP
segment/MAC you add be effective). Enter the IP/IP segment/MAC and then click "OK" button. In the above interface, click
segment/MAC, click to delete it. Click "Apply" to save your settings.

13.5 Preview On Logout

Click Start→Settings→Account and Authority→Security→Preview On Logout to go to the interface below.
Set a camera and then enable or disable the preview permission on logout as required. If a camera's preview permission on logout is "ON", you can
view the live image of the camera when you are logged out of the system. Otherwise, the live image of the camera cannot be seen when logged out.
in the group list to edit the permission group (the operations of the "Edit Permission
95
NVR User Manual
to save the group as a new
to edit IP/IP