License Plate Recognition; License Plate Detection Settings - Speco N8NRE User Manual

AI Event Management
interface and broadcast the audio.
⚫ Enable alarm output pulse (access control).
⚫ Trigger record, snapshot, alarm-out, buzzer, push, pop-up video, E-mail and pop-up message box as needed. The alarm linkage settings are
similar to the face detection alarm (see 9.1.1 Face Detection Settings for details).
⚫ Click "Apply" to save your settings.
③ Set the stranger alarm linkage items. When the captured face picture doesn't match the face pictures in the face database or their similarity is
lower than the set value, the captured person will be regarded as a stranger.
⚫ Configure the schedule
⚫ Set the text prompt and voice prompt. The text will show on the captured picture and the voice will be broadcasted when detecting a stranger.
⚫ Trigger record, snapshot, alarm-out, buzzer, push, pop-up video, E-mail and pop-up message box as needed. The alarm linkage settings are
similar to the face detection alarm (See 9.1.1 Face Detection Settings for details).
⚫ Click "Apply" to save your settings.
④ Click "+" to add more successful recognition tasks. Select the added task and then click "–" to delete it.

9.2 License Plate Recognition

Please add an ANPR camera before using this function. If your camera doesn't support this function, please skip the following instructions.
When setting up an LPR for the first time, please use the following procedures:
Enable and set plate detection → Add plate group → Add plates to the plate group → Enable license plate recognition →
Set successful recognition (or strange plate) alarm linkage

9.2.1 License Plate Detection Settings

Click Start→AI/Event→AI Event→LPR to go to the interface below. Select an ANPR camera and click the "Detection" tab shown below.
57
NVR User Manual