Main Functions - Speco N8NRE User Manual

EZ Setup & Main Interface
The setup panel includes seven modules. Each module provides some function entries with links for convenient operation.
Take Camera module as an example. The Camera module provides convenient links such as "Add Camera", "Edit Camera", "Image Settings", "Motion",
"Intelligence Analysis" and "PTZ". Click Camera to go to the camera management interface as shown below.
There are some function items on the left side of the camera management interface. Click each item to go to corresponding interface or window. For
instance, click "Add Camera" to open the window below.
Click the main menus on the top of the camera management interface to go to corresponding interfaces. Refer to the picture below. For instance,
you can go to the system setup interface by clicking "System" tag.

3.2.3 Main Functions

➢
Camera
This module covers the functions such as Camera Management (see Chapter 4 Camera Management for details), Image Settings (see 5.3 Image
Configuration for details), Motion (see 11.2.1 Motion Configuration for details), and PTZ (see Chapter 6 PTZ for details) and so on.
➢
Record
This module covers functions such as Encode Parameters and Record Schedule. Please see Chapter 7 Record & Disk Management for details.
12
NVR User Manual