Main Interface; Main Interface Introduction - Speco N8NRE User Manual

EZ Setup & Main Interface
details.
⑨ QR Code. Enable the NAT function in the interface or set it in the network configuration after exiting the wizard (please refer to 14.1.8 NAT
Configuration for details). You can scan the QR Code through the Speco Blue App available for iOS and Android to view your cameras easily and
securely. Please refer to 15.1 Mobile Client Surveillance for details. Click "OK" to save your settings.
⑩ Cloud Upgrade. Enable "Cloud Upgrade" and then click "OK" to save. If this function is enabled, you will get the latest version from the cloud
server. Please refer to Cloud Upgrade section for details. Only user levels with "Network" access will be able to enable/disable cloud upgrades.

3.2 Main Interface

3.2.1 Main Interface Introduction

The buttons in area ① are described in the table below.
Button
Start button. Click to open area ③.
Full screen button. Click to show full screen and hide area 2; click again to
exit the full screen.
Screen mode button.
Dwell button (see 5.2.2 Quick Sequence View and 5.2.4 Scheme View In
Sequence for details).
Click to enable OSD; click again to disable OSD.
Meaning
10
NVR User Manual