Pppoe Configuration; Ddns Configuration - Speco N8NRE User Manual

Device Management
①
Check "Create a certificate request".
②
Click "Create".
③
Fill out the corresponding information in the above creation box. Enter the country (two letter code), domain (NVR's IP address/domain),
validity date, password, province/state, region and so on.
④
Click "OK". Then a certificate request file (CSR) will be created.
⑤
Click "Export" to export the certificate request file. Then send this file to the trusted third-party CA to apply a signed certificate.
⑥
Click "Browse" and select the signed certificate issued by the CA and then import this certificate.
⑦
Click "Enable".
⑧
Click "Apply" to save your settings.
After that, the device can be accessed by entering https://IP: https port via the web browser (e.g. https://192.168.1.201:443).
Server Port: the default server port of the NVR is 6036. The server port number can be changed as required. The port is mainly used in network video
system management.
POS Port: the default POS port of the NVR is 9036.
API Server: You can log into a media player which supports the RTSP protocol. Moreover, a third-party can further develop performance through an
API service.
Authentication: Basic authentication and digest authentication are optional.
RTSP Port: RTSP real-time stream protocol can be used to control the transfer of real-time data. Through a media player which supports the RTSP
real-time stream protocol (Such as VLC player), you can view live images synchronously. The default RTSP port is 554 and it can be changed as
needed. (The address format: rtsp://IP address:554/chID=1&streamType=main or rtsp://IP address:554/chID=1&streamType=sub; main indicators
main stream; sub indicators sub stream; chID indicators channel ID).
Examples: Enable RTSP and "Anonymous". Then open VLC player and enter the address (for example:
rtsp://192.168.1.88:554/chID=1&streamType=main) in the network address bar of VLC player. You can then view the video of channel 1.

14.1.3 PPPoE Configuration

Click Start→Settings→Network→PPPoE to go to the interface as shown below. Check "Enable" in "PPPoE Settings" and then enter the username
and password obtained from the dealer. Click "Apply" to save your settings.

14.1.4 DDNS Configuration

The DDNS is used to control the dynamic IP address through a domain name. Speco Technologies provides free DDNS service with US-based servers. You
can access the NVR easily if the DDNS is enabled and configured. Click Start→Settings→Network→DDNS to go to the interface shown below. The default
DDNS type will be "specoddns.net". A default domain name will be provided, and you can use this for your domain name or enter your own. If your
99
NVR User Manual