View Disk And S.m.a.r.t. Information - Speco N8NRE User Manual

Record & Disk Management
By using a disk group, you can correspond a camera to disk (the recording data of the camera in the group will be stored into the disks in the same
group). An NVR with e-SATA interface supports e-SATA recording.
The added disks and cameras will be added into group one automatically. The disks and cameras in the groups can be deleted except group one
(select a disk group and then click
cameras will be moved into group one automatically.
Each group can add disks and cameras from other groups. Each disk and camera can only be added into one group. Select a disk group and then click
in the disk or camera row to open a window. Check the disks or cameras in the window and then click "Add".
For models with 2 or 4 HDD slots, BK group can be added as shown below.
Click to add the backup HDD. After account verification, select an HDD and then this HDD will be removed from the normal group to
the backup group. Simultaneously, it will be formatted. Please back up all data of this HDD in advance when you want to remove it to the backup
group.
You can add cameras to this HDD. The added cameras can exist and be recorded both in one HDD of the normal group and the backup group.
Note: Each HDD only can exist in one group.

7.4.3 View Disk and S.M.A.R.T. Information

Click Start→Settings→Disk→View Disk Information to view the HDD information; click "S.M.A.R.T. Information" to view the working status of the
HDD (refer to the picture below); click "Health Status Check" to check the disks' health status.
on the top right corner of the added disk or camera to delete it from the group). The deleted disks and
41
NVR User Manual