Quick Sequence View; Camera Group View In Sequence - Speco N8NRE User Manual

Live View Introduction
name; click to delete the display mode.

5.2.2 Quick Sequence View

You can start quick sequence view if the scheme has not been created. If the scheme has been created, please refer to 5.2.4 Scheme View in Sequence
for details.
Go to the live view interface and then click
by group according to the camera number of the current screen mode. Double click the sequence view interface to pause the view; double click
again to restore the view. Click

5.2.3 Camera Group View In Sequence

You can start camera group view in sequence if a camera group has been created (see 4.2.1 Add Camera Group for details).
① Go to the live view interface and then select a camera window.
② Double click one camera group on the right side of the interface. The cameras in the group will start camera group view one by one in the
selected camera window.
You can also drag the group directly to any preview window. Right click on the group view window and then click "Close Dwell" button to stop the
view.
to open a small window. Set the dwell time in the window and then click
to stop the view.
20
NVR User Manual
to view the live group