Speco N8NRE User Manual page 33

PTZ
Adjust the dome's direction and then click "Save Position" to save the current preset position (you can also click another preset in the preset list and
then save the preset position after adjusting the dome's direction); click
selected preset.
You can also go to preset settings interface for preset setup, see 6.2 Preset Setting for details.
➢
Cruise Settings
Click "Cruise" to go to cruise operation tab and then click "Add" button to open the window below. You can add up to 8 cruises for each dome.
① Enter the cruise name in the "Add Cruise" window and then click "Add preset" to open the "Add Preset" window (Before adding preset to the
cruise, please add preset of the dome first).
② In the "Add Preset" window, select the preset name, preset time and preset speed and then click "OK."
③ In the "Add Cruise" window, you can click
Click "Add" button to save the cruise.
Click to start the cruise and click
selected cruise.
You can also go to cruise settings interface for cruise setup, see 6.3 Cruise Settings for details.
➢
Cruise Group Settings
On the right panel, click to go to the cruise group settings tab. Click "Add" to add a cruise group as shown below.
to reselect the preset, then change the preset time and speed. Click
to stop the cruise in the cruise list of the cruise operation tab; click the "Delete" button to delete the
28
in the preset list to call the preset; click "Delete" button to delete the
NVR User Manual
to delete the preset.