Cruise Group Settings; Trace Settings - Speco N8NRE User Manual

PTZ
details.
➢
Edit Cruise
Select the camera and cruise in the "Cruise" interface. Enter the new cruise name and then click
add a preset to the cruise. Click
click to move down the preset and click
➢
Delete Cruise
Click on the camera list on the right side of the interface to display the cruise information of the dome and then click
corner of the cruise to delete the cruise.

6.4 Cruise Group Settings

Click Start→Settings→Camera→PTZ→Cruise Group to go to the interface shown below.
➢
Add Cruise Group
Click "Add Cruise" to add the cruise, or click
left panel as shown below to play the cruise lines in sequence.
➢
Delete Cruise
In the cruise list, click to delete the cruise.

6.5 Trace Settings

Click Start→Settings→Camera→PTZ→Trace to go to the interface as shown below.
➢
Trace Record
Select the PTZ camera and then click "Add" or extend the IPC information by clicking
click "Start Record" and move the speed dome to change its position and set its trace. Then click "Stop Record" to complete the trace record.
to edit the preset. Click to delete the preset from the cruise. Click one preset in the preset list and then
to move up the list. Click
to extend the cruise list and then click
to save the cruise name. Click "Add Preset" to
to start the cruise and click
to add the cruise. After that, click "Play" on the
and then click
31
NVR User Manual
to stop it.
on the top right
to add a trace name. After that,