General Event Management
11.7 Manual Alarm
Click
on the tool bar at the bottom of the live preview interface to open this window. Click "Trigger" to start alarm. Click "Clear" to stop alarm.
11.8 View Alarm Status
Click Start→Settings→Alarm→Alarm Status or click
Click "Clear" to stop the buzzer when a buzzer alarm is triggered. Click
If the exception information is more than one page, you can enter the number in the box and then click
/
to view the exception alarm information in the previous/next page.
11.9 System Disarming
You can quickly disarm the device through the alarm host or a remote client (such as the mobile app).
on the tool bar at the bottom of the live preview interface to view the alarm status.
to view the detailed information as shown below.
87
NVR User Manual
to jump to the specified page. Click