Date And Time Configuration - Speco N8NRE User Manual

Device Management NVR User Manual
Device Name: The name of the device. It may display on the client end or CMS to help users recognize the device remotely.
Video Format: Two modes: PAL and NTSC. Select the video format according to the camera.
Main Output: Enable "Fixed display resolution" and then select the main output as needed.
Note: You can set the resolutions of the main output and secondary output respectively if the NVR has dual outputs. Refer to the picture shown
below.
Sequence Automatically: Select and set "wait time". The system will sequence automatically if it is not operated during the time you set.

14.2.2 Date and Time Configuration

Click Start→Settings→System→Basic→Date and Time to go to the interface shown below.
Set the system time, date format, time format and time zone of the NVR. The default time zone is GMT+08 Beijing, Hong Kong, Shanghai, Taipei. If
the selected time zone includes DST, the DST of the time zone will be checked by default. Click "Apply" to save your settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual: select "Manual" in the "Synchronous" option and then click after the "System Time" option to set the system time.
NTP: select "NTP" in the "Synchronous" option and then enter the NTP server.
105