Setup Panel - Speco N8NRE User Manual

EZ Setup & Main Interface
Introduction of area ②:
Click "Camera" to view all the added cameras in the camera list. Select one camera window on the left side of the interface and then double click
one camera in the list to preview the camera image in the selected window.
Click "Single Channel Sequences" to view all the added groups in the group list; click one group in the list to view all the added cameras in the group
(refer to 4.2 Add/Edit Camera Group for detail configuration of the camera group). Select one camera window on the left side of the interface and
then double click one group in the group list to preview the cameras' images one by one in the selected window.
Click "Customize Layout" to view all the display modes in the display mode list (refer to 5.2.1 Display Mode for detail configuration of the display
mode). Double click one display mode in the list to switch to the display mode for previewing.
Click "Target Detection" to go to target detection interface. This tab will show the captured human, vehicles, license plates and face images. (This
function is only available for some models using the appropriate cameras).
Introduction of area ③:

3.2.2 Setup Panel

Click Start→Settings to open the setup panel as shown below.
Button
Click
Instant Playback) or going to the playback interface for playback operations
(8.2 Playback Interface Introduction); click
interface. For instance, if you choose "5 minutes ago" as the default playback
time, you can playback the recording from the past five minutes.
Manual record button. Click to enable/disable record.
Manual alarm button. Click to trigger or clear the alarm-out manually in the
popup window.
Record status button. Click to view the record status.
Alarm status button. Click to view the alarm status.
Voice broadcast button. Click to select the channel to broadcast.
Disk status button. Click to view the disk status and RAID status.
Network status button. Click to view the network status.
Information button. Click to view system information.
Click to enable the cloud upgrade feature.
Icon / Button
It shows the current active user. Click the QR code icon to view the QR
code and security code. Users can quickly add the NVR to the server
list of the mobile APP by scanning this QR code.
Click to go to the intelligent analytics interface.
Click to go to record search and export interface, see 8.4 Record
Search, Playback & Export for details.
Click to go to playback interface (click
the live view interface to set the default playback time), see 8.2
Playback Interface Introduction for details.
Click to open the setup panel, see 3.2.2 Setup Panel for details.
Click to log out the system.
Click and then select "Logout", "Reboot" or "Shutdown" in the popup
window.
Click to go to the EZ setup menu.
Meaning
to set the default playback time before starting instant playback (8.1
Meaning
on the tool bar at the top of
11
NVR User Manual
to go to the playback