General Event Management
11.4 IPC Offline Settings
① Click Start→Settings→AI/Event→IPC Offline Settings to go to the interface as shown below.
② Enable or disable "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video", "Pop-up Message Box" and "E-mail". The IPC Offline setup
is similar to that of the sensor alarm (see 11.1 Sensor Alarm for details).
③ Click "Apply" to save your settings.
11.5 Exception Alarm Settings
① Click Start→Settings→AI/Event→Exception Alarm to go to the interface as shown below.
② Enable or disable "Push", "Alarm-out", "Buzzer", "Pop-up Message Box" and "E-mail". The exception handling setup is similar to that of the
sensor alarm (see 11.1 Sensor Alarm for details).
③ Click "Apply" to save your settings.
11.6 Alarm Event Notification
11.6.1 Alarm-out
① Click Start→Settings→Al/Event→Event Notification to go to the following interface:
83
NVR User Manual