Intelligent Analytics; Target Detection View; Human Body/Vehicle Detection View; Face Detection/Match View - Speco N8NRE User Manual

Intelligent Analytics

10.1 Target Detection View

10.1.1 Human Body/Vehicle Detection View

This feature only works with the appropriate Speco Blue cameras. The setup steps are as follow:
① Enable the line crossing/Intrusion/Target counting function of IPCs/NVR, draw the line or area and choose the detection target (see 9.3 Line
crossing Detection and 9.4 Intrusion Detection for details).
② Go to live view interface and then click
on the top right. You can also choose the target detection tab on the left panel of the live view interface to go to the target detection interface of
multi-channel shown below. Note that only some models support multi-channel target detection function. Click the captured picture on the right of
the live interface to see detailed snapshot information such as snapshot time, camera, event type and target type.
Click "More" to see a dropdown list. You can export the captured pictures by clicking "Export" or view the target ID by clicking "Information". Click
"Search" to go to smart human body/vehicle search interface. The system will automatically search captured people/vehicles. Click "Playback" to go
to the playback interface.

10.1.2 Face Detection/Match View

Only face recognition NVRs (8/16/32NRE) support the functions in this section. If your NVR doesn't support these features, you can skip the following
instructions.
The setup steps are as follow:
① Enable face detection function (see 9.1.1 Face Detection Settings for details).
② Enable face recognition function and set the alarm linkage items (see 9.1.3 Face Recognition Settings for details).
Go to live view interface and click on a face detection channel. This will open a toolbar under the channel. Next, click
③
detection interface of this channel. In this interface, you can switch the channel on the top right.
10 Intelligent Analytics
to go to the target detection interface of this channel. In this interface, you can switch the channel
67
NVR User Manual
to go to the target