Ptz; Video Cover - Speco N4JLN User Manual

USER MANUAL

5.1.4 PTZ

This menu allows you to configure the PTZ (Pan-Tilt-Zoom) settings for speed dome cameras.
Channel: Channel name
Signal Type: If your PTZ camera is connected to the RS485 port, then choose "Analog", otherwise choose
"Digital".
Below items need to be set for Analog PTZ only.
Protocol: Choose the communication protocol between a PTZ capable camera and NVR.
Baudrate: The speed of the information sent from the NVR to the PTZ-capable camera. Make sure it
matches the compatibility level of your PTZ-capable camera.
DataBit / StopBit: The information between the NVR and PTZ-capable camera is sent in individual
packages. The DataBit indicates the number of bits sent, while the StopBit indicates the end of the
package and the beginning of the next (information) package. The available parameters for DataBit are: 8,
7, 6, 5. the available parameters for the StopBit are 1 or 2.
Parity: For error check. See the documentation of your PTZ-capable camera, to configure this setting.
Address: Set the command address of the PTZ system. Please be noted that each PTZ-capable camera
needs a unique address to function properly

5.1.5 Video Cover

This menu allows you to create privacy zones to partially cover certain part of the image. You can create up
to 4 privacy zones in any size and location on the camera image. Enable the Privacy Zone, and choose how
many zones you need. The zone(s) appear as a "red box". Click the edge of the red box and drag it to any
size to create a privacy zone.
Note: The area of privacy zones you had set will be invisible in both live view & recording video.
30