Remote Preview - Speco N8NRE User Manual

Remote Surveillance
The buttons and icons on the top right corner of the remote interface are introduced as follows.
admin: the current login username.
Logout: click to log out and return to the login interface.
Modify Password: click to change the password of the currently active user. Enter the current password and then set a new password in the popup
window. Click "OK" to save the new password.
Local Settings: click to change the local settings. Set the snapshot number and click "Browse" to set the snapshot path and record path as shown
below. Click "Apply" to save your settings.
Below as an introduction is a web browser with the applicable plug-in installed.

15.4.1 Remote Preview

Click "Live View" in the remote interface to go to the live view interface. The live view interface consists of the four areas marked in the following
picture:
➢
Start Preview
Select a window in the preview area and then click one online camera on the left panel to preview the camera in the window. You can click
the tool bar to preview all the cameras.
➢
Left Panel Introduction
Click on the left panel to hide the panel and click
⚫
View Camera
Click to view the cameras. You can view the number of all the added cameras and the online cameras. For instance, the left number 3 in
to show the panel. You can view all the added cameras and groups on the left panel.
112
NVR User Manual
in