Record & Disk Management; Record Configuration; Mode Configuration - Speco N8NRE User Manual

Hide thumbs Also See for N8NRE:
Table of Contents

Advertisement

Record & Disk Management

7.1 Record Configuration

7.1.1 Mode Configuration

Please format the HDDs before recording (refer to 7.4.1 Disk Management for details). Click Start→Settings→Record→Mode Settings to go to the
mode settings interface. You can set the record time under the "Manual Record Settings" and then click "Apply" to save your settings. There are two
record modes: auto mode and scheduled mode.
Auto Mode
Motion Record: Motion alarm record will be enabled when motion alarm is triggered.
Sensor Record: Sensor alarm record will be enabled when sensor alarm is triggered.
Motion Record+Sensor Record: Motion/sensor alarm record will be enabled when motion/sensor alarm is triggered.
Continuous Record+Motion Record: Normal record is enabled all the time; motion alarm record will be started when motion alarm is triggered.
Continuous Record+Sensor Record: Normal record is enabled all the time; sensor alarm record will be started when sensor alarm is triggered.
Continuous Record+Motion Record+Sensor Record: Normal record is enabled all the time; motion/sensor alarm record will be enabled when
motion/sensor alarm is triggered.
Continuous Record+Motion Record+Sensor Record+ AI Record: Normal record is enabled all the time; motion/sensor/analytics alarm record will be
enabled when motion/sensor/intelligence analytics alarm is triggered.
You can add more auto modes on intelligence record. Click "Advanced" button to open the window below. Check the modes in the window and then
click "Add" button to show the modes in the record mode list (in the window, the checked modes can be shown in the record mode list while the
unchecked modes cannot; you should check "AI Record").
Select one auto mode for the corresponding window to open. Set the encode, GOP, resolution, FPS, bitrate type, quality, max bitrate and audio of
each camera and then click "OK" to save your settings. Please adjust the parameters according to the actual condition.
7 Record & Disk Management
34
NVR User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents