Remote Surveillance
15.4.5 Remote Configuration
Click "Function Panel" in the remote interface and then configure the camera, record, alarm, disk, network, account and authority and system of the
NVR remotely. All these settings are the same as the settings of the NVR. See the configurations of the NVR for details.
➢
Jumping to IPC Web Client
Except for IPCs that access with RTSP protocol, the IPC can directly jump from the NVR web client to the IPC web client by clicking
above-mentioned interface.
1. Please log into the NVR Web Client (See 15.2 Web LAN Access or 15.3 Web WAN Access for details).
2. Click Function Panel→Camera→Edit Camera to go to the following interface:
3. Select the camera and click
to log into the web client of the camera. From there, you can set the parameters of the camera as needed.
116
NVR User Manual
in the