Motion Alarm Handling Configuration; Combination Alarm - Speco N8NRE User Manual

General Event Management
② Select a camera, enable motion, and set the sensitivity and duration for that camera.
Sensitivity: The higher the value is, the more sensitive it will be to motion. You should adjust the value according to the practical conditions since the
sensitivity is influenced by background color and time (day or night).
Duration: The interval time between adjacent motion detections. For instance, if the duration time is set to 10 seconds, once the system detects a
motion, it will trigger the alarm and will not detect any other motion (specific to that camera) for 10 seconds. If there is another motion detected
during this period, it will be considered as continuous movement.
③ Drag along the camera image to set the motion area. You can set more than one motion area. Click "All" to set the whole camera image as the
motion area. Click "Reverse" to swap the motion area and the non-motion area. Click "Clear" to clear all the motion areas.
④ Click "Apply" to save your settings. Click "Processing Mode" to go to the alarm handling configuration interface of the motion alarm.

11.2.2 Motion Alarm Handling Configuration

① Click Start→Settings→Alarm→Motion Alarm to go to the following interface:
② Enable or disable "Record", "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail". The alarm handling setup for
motion alarm is similar to that of the sensor alarm (see 11.1 Sensor Alarm for details).
③ Click "Apply" to save your settings. You can click "Motion Settings" to go to the motion configuration interface.

11.3 Combination Alarm

① Click Start→Settings→Alarm →Combination Alarm to go to the interface below.
② Customize combination alarm. Set alarm name and click "Configure" under the Combined Alarm Configuration menu. Then, select alarm type
and alarm source. Finally, click "OK" to save your settings.
③ Enable or disable "Record", "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail". The alarm handling setup of
combination alarm is like that of the sensor alarm (see 11.1 Sensor Alarm for details).
④ Click "Apply" to save your settings.
82
NVR User Manual