Cruise Setting - Speco N8NRE User Manual

PTZ
➢
Add preset
Select camera and then click "Add" button to add a preset; or click
information of the dome and then click
interface; please see 6.1 PTZ Control Interface Introduction for details.
➢
Edit preset
Select camera and preset. You can enter the new name of the preset and then click
position, zoom, focus and iris of the preset and then click "Save Position" to save the preset.
➢
Delete Preset
Select camera and preset and then click "Delete" to delete the preset.
6.3 Cruise Settings
Click Start→Settings→Camera→PTZ→Cruise to go to the interface as shown below.
➢
Add Cruise
Click in the camera list on the right side of the interface to display the cruise information of the dome and then click
The operations of the "Add Cruise" window are similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface Introduction for
in the camera list on the right side of the interface to display the preset
to add a preset. The operations of the "Add Preset" window are similar to that of the PTZ control
30
to save the new preset name. Adjust the rotating speed,
NVR User Manual
to add cruise.