Speco N8NRE User Manual page 103

Device Management
HTTP Port: the default HTTP port of the NVR is 80. For security, the port number can be changed another number such as 81. The port is mainly used
for web client access. If you want to access the NVR through a web browser, you should enter the IP address plus HTTP port in the address bar of the
web browser like http://192.168.11.61:81.
Note: The HTTP port and server port of the NVR should be mapped to the router before you access the NVR via WAN.
HTTPS Port: the default HTTPs port of the NVR is 443.
HTTPs provides authentication of the web site and protects user privacy. You can enter IP address plus HTTP port in the address bar of the web
browser. Then enter username and password to log in. Click Functional Panel→Network→HTTPS to go to the interface below. There are three ways
to enable HTTPs service.
A. Create a private certificate.
① Select "Create a private certificate".
② Click "Create".
③ Fill out the corresponding information in the above creation box. Enter the country (two letter code), domain (NVR's IP address/domain), validity
date, password, province/state, region and so on.
④ Click "OK".
⑤ Check "Enable" checkbox.
⑥ Click "Apply" to save your settings.
B. Install a signed certificate
①
Check "Signed certificate already....".
②
Click "Browse" to select the certificate you want to import.
③
Click "Import".
④
Check "Enable".
⑤
Click "Apply" to save your settings.
Please note that the certificate uploaded here must be a certificate with private key.
To attach a private key to the certificate, please open the certificate and the private key files with an editor (such as Notepad++) and then copy the
private key to the certificate.
C. Create a certificate request
98
NVR User Manual