Device Management
14.2.3 Recorder OSD Settings
Click Start→Settings→System→Basic→Recorder OSD settings to go to the interface below. OSD name and icon can be enabled here.
14.2.4 PoE Settings
⚫
PoE Management
Click Start→Settings→System→Basic Settings→PoE Power Management to go to the interface below. This function is only available for recorders
with built-in PoE.
In this interface, you can view the the current power consumption of any attached POE cameras. The PoE power supply of the PoE camera/panel can
be enabled or disabled by selecting "ON" or "OFF" as needed. This can also be done remotely through the Web browser.
106
NVR User Manual