1. SAFETY INSTRUCTIONS
1.1
Safety during kit installation
W
ARNING
W
ARNING
of the projector covers.
W
ARNING
down cycle to finish after switching the projector to standby (the sound of the fans comes to a very low level)
and wait for 15 more minutes before starting any of the procedures below.
C
AUTION
sensitive parts.
R59770498 PMP KIT 28/02/2011
:
The procedures below may only be performed by Barco trained and qualified technicians.
:
Power down the projector and remove the power cord form the wall outlet before removing any
:
The projector must be cooled down before removing any of the projector covers: wait for the cool
:
Wear a wrist band which is connected to the ground while handling the electrostatic discharge
1. Safety instructions
3