Barco SIM 5W User Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. SIM 5W
  6. User manual

Barco SIM 5W User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SIM 5W

User guide

R59770324/06
22/12/2011
Downloaded From projector-manual.com Barco Manuals

Advertisement

Table of Contents
loading

Related Manuals for Barco SIM 5W

Summary of Contents for Barco SIM 5W

  • Page 1: User Guide

    SIM 5W User guide R59770324/06 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 2 Barco nv Control Rooms & Simulation Division Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.84.86 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in Belgium Downloaded From projector-manual.com Barco Manuals...

  • Page 3: Disposal Information

    Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.
  • Page 4 The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period.

  • Page 5: Table Of Contents

    Setting the Brightness....................59 R59770324 SIM 5W 22/12/2011...
  • Page 6 DynaColor ........................133 R59770324 SIM 5W 22/12/2011...
  • Page 7 List of images......................191 R59770324 SIM 5W 22/12/2011...
  • Page 8 Table of contents R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 9: Safety Instructions

    Extra Safety manual Read also safety instructions in separate manual (R5976125). R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 10 1. Safety Instructions R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 11: Packaging And Dimensions

    The Lens is supplied as an individual item. The lens is packed in a carton box. Save the original shipping cardboard and packing material, they will be necessary if you ever have to transport the lens. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 12 Save the original shipping carton and packing material, they will be necessary if you ever have to ship your projector. For maximum protection, repack your projector as it was originally packed at the factory. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 13: Installation Guidelines

    At this stage cleaning of the internal optical units will be non-effective and impracticable. Damage of this nature is under no circumstances covered under the manufactures warranty and may deem the R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 14: Projector Position

    Improper positioning of the projector may reduce the lamp life and result in severe accident or fire hazard. Projector Position Keep following projector position guidelines in mind when installing the projector: R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 15: Roll Possibilities

    3. Installation guidelines • +/- 20° roll around projector lens +20° Roll around projector lens -20° Roll around projector lens Image 3-1 Roll possibilities R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 16: Airflow

    The Air Intake Vent is located on the bottom side of the projector while the Exhaust Vent can be found on the left rear side of the projector. Make sure the projector is installed in a location so that the air inlets and outlets for the cooling system are not obstructed. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 17: Air Intake Vent

    Do not touch the Exhaust Vent Grill when the projector is switched on, this part will become hot during operation. AUTION In a multi channel setup, make sure that the hot air outlet from the one projector is not sucked in as fresh air by the other projector. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 18 3. Installation guidelines R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 19: Installation

    • Connections • RCU Terminology Overview • Local Keypad Terminology Overview • Diagnose Leds Dimensions Dimensions are given in mm and inch ( 1inch = 25.4 mm) Weight (projector) : 15kg. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 20: Battery Installation In The Rcu

    2. Lift up the top side of the cover at the same time. 3. Push on the + side of the battery towards the - side 4. Lift up the battery at the same time. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 21: Lens Installation

    Lens Installation Necessary tools No tools. How to install the Lens? 1. Take the lens out of its packing material. 2. Make sure the lens lock holder is in the left position. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 22: Make Sure The Lens Lock Holder Is In The Left Position

    Make sure the lens lock holder is in the left position. 3. Lock the lens by placing it in the housing, push carefully to lock (“click” sound) the lens in the housing. Image 4-4 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 23: The Female Jack On The Lens (A) Must Be In Front Of The Male Jack (B) Located In The Upper-Left Part Of The Housing In

    AUTION The projector is delivered by default with a 100% upward shifted position. To mount the Scheimpflug lens, first shift down. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 24: Cleaning The Lens

    Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth. Other lenses can also be cleaned safely with this Toraysee cloth. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 25: Lens Range

    Maximum shift in two orthogonal directions is not possible for Scheimpflug lenses due to mechanical reasons. Maximum shift capabilities The table below lists the maximum shift measured for different lenses on this projector. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 26: Off-Axis: Defining The Distance To Measure The %Off-Axis

    (a) horizontal shift (b) vertical shift Image 4-8 %off-axis: Defining the distance to measure the %off-axis Left Right Down Image 4-9 Safe shift range based on the maximum up/down, left/right directions R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 27: Lens Brightness

    ANSI lumen and off-axis position values are upto 10% lower. Projector configuration The different configurations Depending on the installation the projector can be mounted in different ways, the 4 different configurations are: Rear/Ceiling Rear/Table Front/Ceiling Front/Table Image 4-10 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 28: Connections

    DVI-D COMPUTER DVI-D HDCP COMPUTER Projector Image 4-11 4.9.2 Connections overview Connections Overview The following table gives an overview of the available connections found on the front panel : R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 29: Composite Video

    Video input of the RGB board. How to connect a composite video signal ? 1. Connect the BNC connector to the projector’s BNC video input R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 30: S-Video

    1. Connect the mini din connector to the projector’s S-Video input DVI-D COMPUTER DVI-D HDCP COMPUTER Projector REC O R D POWER Image 4-14 S-Video connection 4.9.5 RGB data connection The RGB input consists of 5 BNC R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 31: Component Video

    A component video signal is available can also be mentioned in the following way: • • Pr Y Pb • (R-Y) Y (B-Y) How to connect a component video signal? 1. Connect the 3 BNC cables to the projectors Pr Y Pb input. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 32: Dvi

    In case of a selected DVI HDCP source, this DVI out will show a black window, not the content of the signal. 4.9.7.2 Connecting to a DVI connector How to connect a DVI source? 1. Connect the DVI cable to the DVI IN connector of the projector. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 33: Dvi Input Connection

    COMPUTER DVI-D HDCP COMPUTER Projector Image 4-18 DVI input connection How to connect a DVI HDCP source? 1. Connect the DVI cable to the DVI HDCP IN connector of the projector. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 34: Dvi Hdcp Input Connection

    4.9.8 PC connection A RGB signal can be connected through a DB-15 connector (VGA connector). How to connect a PC signal ? 1. Connect the VGA connector to the projector’sDB—15 input R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 35: Communications

    The connection to the projector can be done via a crossed cable or via a HUB on the local network (LAN). How to connect the projector ? 1. Connect the RJ 45 male plug to the projector’s RJ 45 female connector R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 36: Network Settings

    MAC Address of the projector (This is a non-adjustable value programmed into the Ethernet board). IP Address (Current) IP Address of the projector (This is a non-adjustable value). Subnet Mask Subnet Mask (This is a non-adjustable value) R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 37 3. Push the ↓ key to pull down the Installation menu. 4. Push the cursor key ↑ or ↓ to highlight Network settings and press ENTER to select. Image 4-23 A dialog box will be displayed. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 38: Serial Connection

    A dialog box is shown. The different executed operations are shown with a checkbox. The last operation Restarting network takes a few seconds more. Image 4-25 4.9.9.3 Serial connection Serial connection To establish a serial communication with the projector, a RJ12 connector is available. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 39: Serial Connection

    Image 4-26 Default setting for the baudrate is 9600. How to make a serial connection? 1. Plug in the RJ12 connector DVI-D COMPUTER DVI-D HDCP COMPUTER Projector Image 4-27 Serial connection R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 40: Rcu Terminology Overview

    Not used ENTER To confirm an adjustment or selection in the menu Cursor keys To make menu selections, to perform bare scale adjustments or to zoom/focus when the direct access is active R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 41: Local Keypad Terminology Overview

    Attention : Switching to Standby. When the projector is running and you want to go to standby, press the standby key for 2 seconds. IR Receiver IR Receiver R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 42: Diagnose Leds

    Not used Not used Hardware error If blinking : projector busy with passive infitec (ON/OFF) Led 3 IR acknowledgement Not used Standby Status 1. Projector cannot be restarted during this period R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 43: Setup

    Projector orientation (see further setting up the projector’s orientation). Displaying the Projector Address in projection mode 1. Press the Address key (recessed key on the RCU) with a pencil. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 44: Setting Up The Projector Address (Only If Necessary)

    1. Press MENU to activate the Tool bar 2. Press → to select the Installation 3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Projector address R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 45: Setting Up The Orientation

    3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Orientation 5. Press → to pull down the menu 6. Use ↓ or ↑ to select the desired orientation R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 46: Adjusting The Lens

    C O NTR L EN S L EN S Z OO M SH IFT L EN S F O CU S VO L Image 5-5 2. Use the arrow keys to adjust R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 47 A text box appears on the screen, follow the instructions. Image 5-8 Image 5-9 The use of a sheet of paper held in front of the screen can be useful to determine the focus plane (position for best focus) R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 48: Setup The Baud Rate For Serial Communication

    6. Use ↓ or ↑ to select the desired baud rate 7. Press ENTER Always select the highest rate unless otherwise specified. Preferences Overview • Preferences 5.7.1 Preferences Overview • Language setting • Automatic startup • Change password R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 49: Language Setting

    1. Press MENU to activate the Tool bar 2. Press → to select the Installation item 3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Automatic startup R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 50: Change Password

    2. Press → to select the Installation item 3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Change password... Image 5-13 5. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 51: Setup Of Linked Projectors In A Multichannel System

    2. Press → to select the Installation item 3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Linked projectors... Image 5-15 5. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 52 It is advised to declare the projector by a Host name (unique name in the network). The Dynacolor options are used to perform the Dynacolor linking, see Dynacolor adjustment in the Display Setup menu. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 53 5. Setup To clear an IP address or Host name from the text box use the C button R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 54 5. Setup R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 55: Getting Started

    Adjusting the image Startup AUTION For the latest version of the product manuals, see http://www.barco.com. AUTION This projection product contains several optical elements which require a certain warm up time in order to reproduce initial adjustments. If the environment (e.g. ambient temperature of the surrounding) is stable, the product will typically reproduce functional performance within 30 minutes and achieve optimal performance after 45 minutes (advised for multichannel display systems).
  • Page 56 6. Getting started PH A T I N T B R I H T N N T R Image 6-3 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 57: Advanced

    This password can be changed in the Installation menu. How to pull down a menu ? 1. Use ↓ to pull down a menu How to pull down a submenu ? 1. Use → to pull down a submenu R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 58: Using The Dialog Boxes

    2. Press ← or → to select the digit to be changed. 3. Press ↓ or ↑ to increase or decrease the value. To confirm the changes always press ENTER. Use ↓ or ↑ to browse between the different fields. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 59: Source Selection

    The menu will contain one item Lx Video, x being the layer on which the composite video is connected (for example L2 Video if the signal is connected to layer 2) 3. Use ↑ or ↓ to select Lx Video R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 60: S-Video

    The menu will contain one item Lx S-Video, x being the layer on which the composite video is connected (for example L3 S-Video if the signal is connected to layer 3) 3. Use ↑ or ↓ to select Lx S-Video Image 7-5 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 61: Rgb-Yuv

    Select PC when you are in presence of a data signal of the RGB + sync form connected to the D15 input connector of the projector. An RGB data signal can have its sync signal added in different ways, refer to the Installation section for more information on the RGB+sync signals accepted by the PC input. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 62: Dvi

    A bullet indicates the selected composite video source which now appears on the screen. Adjustments on a DVI signal The digital nature of this signal eliminates the need of most adjustments R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 63: Image

    3. Press ↓ to Pull down the Image menu 4. Use ↑ or ↓ to select settings 5. Press → to pull down the menu 6. Use ↑ or ↓ to select Brightness 7. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 64: Color (Video Signals Only)

    7. Press ENTER On the screen appears now a slider box Image 7-12 8. Use ←or → , the numeric keys on the remote, or the keypad to change the Tint R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 65: Sharpness (Video Signals Only)

    A bad phase adjustment will result in bad transitions and sometimes noise. (for example text will not be clear). How to adjust the Phase 1. Press MENU to activate the Tool bar 2. Press → to select the Image item 3. Press ↓ to Pull down the Image menu R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 66: Noise Reduction (Only For Video Signals)

    6. Use ↑ or ↓ to select Gain Control on Video 7. Press → to pull down the menu 8. Use ↓ or ↑ to select Auto 9. Press → to pull down the menu R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 67: Manual Gain Control On Video

    6. Use ↑ or ↓ to select Gain Control on Video 7. Press → to pull down the menu 8. Use ↓ or ↑ to select Manual Image 7-18 9. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 68: Aspect Ratio

    Image 7-21 Anamorphic aspect ratios in (non-HDTV) DVD sources In native HDTV DVD players the image is a real 16:9 format. 16:9 2.35:1 Image 7-22 Aspect ratios in native HDTV DVD sources R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 69: Aspect Ratio For Wuxga (1920X1200)

    The aspect ratio setting forces the projector to project an image using a defined aspect ratio : • Auto • • 16:9 • 16:10 • • Custom The settings do not refer to the aspect ratio of the source ! R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 70 How to change the Aspect ratio ? 1. Press MENU to activate the Tool bar 2. Press → to select Image 3. Press ↓ to Pull down the Image menu R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 71 6. Use ↑ or ↓ to select Custom 7. Press ENTER to confirm A dialog box is displayed Image 7-27 8. Enter the values for width and height of the image The image aspect ratio is updated. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 72: Input Balance (Rgb Signals Only)

    100% white image (image A) Black balance : In the projector, we will set the brightness for each color until we get a 0% light output picture when projecting a 100% black image (image B). R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 73 4. Press ↓ to Pull down the Image menu 5. Use ↑ or ↓ to select Input balance 6. Press → to pull down the menu 7. Use ↓ or ↑ to select Black level... R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 74 4. Press ↓ to Pull down the Image menu 5. Use ↑ or ↓ to select Input balance 6. Press → to pull down the menu 7. Use ↓ or ↑ to select White level... R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 75: Passive Infitec Tm (Optional)

    How to activate passive Infitec 1. Press MENU to activate the Tool bar 2. Press → to select the Image item 3. Press ↓ to Pull down the Image menu R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 76: Image Files

    - the AutoImage is launched via the button on the RCU, the projector’s OSD or from the desktop’s OSD File notation The notation of the image file happens as follows : /Standard/SXGA+@60.xml file extension = xml Vertical freq Resolution Type of file : standard or custom Image 7-38 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 77: Load File

    What to do if the image is not perfect ? If the displayed image is not correct after Auto Image or after selecting the best fitting file, go to the Edit menu, select the active file and change the settings. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 78: Forced File Load

    10.Use ↑ or ↓ to select the desired file (for example /Standard/SXGA+@60.xml) 11. Press ENTER The file is selected and will be loaded in the future. To delete the forced file, go to the desired input and press ENTER. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 79: Auto Image

    The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specifications before entering the data. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 80 The following items can be adjusted : • Total horizontal pixels • Active horizontal pixels • Horizontal start in pixels • Horizontal period in ns • Active vertical lines • Vertical start in lines R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 81 Clamp width : allows to set the width of clamp pulse in the clamping circuit It is recommended to use the default values. Advanced settings for Digital Data sources (DVI and HDSDI) The advanced button enables the advanced settings for a DVI source. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 82: Save As (Create A Custom File)

    Active pixels, Start lines, Active lines. In that case, hit Enter and change the slider to position 1, thus enabling more settings in the Edit file menu. Image 7-49 In the current software versions (1.22 for (Galaxy)NH-12, 1.23 for (Galaxy) NW-12, 1.02 for SIM 5W), changing the UsePictureBox settings also inverts the interlacing! 7.5.6 Save as (create a custom file)

  • Page 83: Rename File

    1. Press MENU to activate the Tool bar 2. Press → to select the Image files item 3. Press ↓ to Pull down the Image files menu 4. Use ↑ or ↓ to select copy R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 84: Delete

    4. Use ↑ or ↓ to select delete 5. Press ENTER A dialog box is displayed Image 7-56 6. Use ↑ or ↓ to select the desired file 7. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 85: Geometry

    Edit : allows to edit a custom geometry file • Rename : allows to rename the geometry file • Copy : allows to copy the geometry file • Delete : allows to delete the geometry file R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 86: Accessing The Geometry Menu

    The level of the adjustment gives a measure of this impact. A level 1 adjustment happens on the 4 corners of the image and will thus affect the whole image whereas a level 21 will only affect the adjusted point (called local points). R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 87: Geometry Levels

    Level Hierarchy The fact that the adjustment affects other points means that a certain hierarchy must be respected when adjusting the geometry. The hierarchy or levels are indicated in the following image R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 88: Load

    How to load a geometry file ? 1. Press MENU to activate the Tool bar 2. Press → to select Geometry 3. Press ↓ to Pull down the Geometry menu 4. Press ↓ to select Load R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 89: Edit

    1. Press MENU to activate the Tool bar 2. Press → to select Geometry 3. Press ↓ to Pull down the Geometry menu 4. Press ↓or ↑ to select Edit 5. Press → to open the Edit menu R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 90: Geometry Edit Wizard

    When entering the Edit mode, the Edit dialog box is displayed. When selecting a point in a certain adjustment, a yellow box shows the selection and a blue dotted box is placed around the selected grid point, indicating the interaction zone. Image 7-64 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 91 Depending on the geometry mode, the dialog box may slightly differ, the dialog box below is for a 2x2 mode adjustment. Image 7-66 Field Description Notes /adjustment Level 2x2 gives the selected geometry adjustment. In this case, a 2x2 adjustment R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 92: Geometry Edit Modes

    Edit mode : allows to select the desired control (edit box, ...) in the dialog box. • Change mode : allows to change the values in the controls (edit box, radio buttons, ...) of the dialog box. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 93 7. Advanced Image 7-68 Image 7-69 Image 7-70 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 94: Editing A Geometry File

    A 3x3 mode adjustment gives the following new points to be adjusted ( the 4 points of the 2x2 mode being already adjusted : they are therefore left out of the grid). Note that in this mode, 2 levels are involved, the level 2 and the level 3. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 95 11 12 13 14 15 16 17 18 19 20 21 22 Image 7-73 How to start up the geometry edit ? 1. Start up the Geometry Edit menu 2. Press ↓ to select 2x2... 3. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 96 A dialog box is displayed. The Select mode is enabled and the top/left (row = 0 ; colom = 0) corner is selected Image 7-74 Image 7-75 How to select another point ? 1. Press → to select the next adjustment point R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 97 7. Advanced The column is adapted to 32 Image 7-76 Image 7-77 2. Press ↓ to select the next adjustment point The row is adapted to 32 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 98 7. Advanced Image 7-78 Image 7-79 3. Press ← to select the next adjustment point R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 99 Adjusting point (row =0 ; column =0) by 100 (pixels) along the x axis in the 2x2 mode 1. Press ENTER to go to the Adjust Mode The Adjust mode is selected R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 100 How to adjust using the Edit and Change mode ? Adjusting point (row =0 ; column =0) by 100 (pixels) along the x axis in the 2x2 mode 1. Press 2 times ENTER to go to the Edit Mode R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 101: Axis Link

    The image is distorted along the X axis. Notice the unaffected regions. 7.6.6.5 Axis link What is AxisLink ? When AxisLink is set to On, the adjustment coordinate system will coincide with the edges of the distorted image. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 102 Following example will show a basic 2x2 adjustment with AxisLink set On and Off. Start with a non distorted image, assume the left top corner is selected. Image 7-86 Shift the left top corner +300 pixels to the left. Image 7-87 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 103 The coordinate system used for the adjustment is absolute. AxisLink [ON] AxisLink [OFF] 216,300 300,300 Image 7-88 How to set AxisLink ON ? 1. Start up the Geometry Edit menu 2. The Edit mode is selected R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 104: Shift Adjustment

    A dialog box is displayed. Note that In the shift adjustment, the Adjust mode is selected by default (instead of the Select mode for the other geometry adjustments). 4. Press ENTER to go to the Edit Mode R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 105 7. Advanced The Edit mode is selected Image 7-91 5. Use ↑ and ↓ to select the PixelsX edit box The PixelsX edit box is focused Image 7-92 6. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 106: Transport Delay

    The Transport Delay is the interval between the time at which an image frame is received from the first FPGA of the PMP and the time at which the processing of this frame starts in the second FPGA of the PMP. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 107: Transport Delay

    How to set Transport Delay to manual or automatic ? 1. Start up the Geometry Edit menu 2. Push the cursor key ↑ or ↓ to highlight Transport Delay... and press ENTER to select. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 108: Sharpness

    What can be done ? In some extreme warping conditions digital noise may appear in the warped regions. The sharpness adjustment in the Geometry menu allows to get rid of these perturbations. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 109: Geometry Reset

    1. Start the Geometry Edit menu 2. Push ↓ or ↑ to select Reset 3. Push the → key to pull down the menu. 4. Push ↓ or ↑ to highlight Reset all levels..R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 110: Restore To A Level

    Restore to a level means that all the higher level geometry corrections are reset (all geometry correction values are set to 0). The correction values of the level and all the lower levels are kept. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 111: Geometry Restore Example : Restoring To A 9X9 Level

    2. Push ↓ or ↑ to select Reset 3. Push the → key to pull down the menu. 4. Push ↓ or ↑ to highlight the desired level to restore, Restore to ..R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 112: Rename A Geometry File

    5. Press BACK to return to the Geometry Edit menu. 7.6.7 Rename a Geometry File How to rename a geometry file ? 1. Start up the Geometry menu 2. Press ↓ to select Rename Image 7-105 3. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 113: Copy A Geometry File

    Copy a Geometry File How to Copy a Geometry File? 1. Start up the Geometry menu 2. Press ↓ to select Copy Image 7-107 3. Press ENTER A dialog box is displayed R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 114: Delete A Geometry File

    Delete a Geometry File How to Delete a Geometry File? 1. Start up the Geometry menu 2. Press ↓ to select Delete Image 7-109 3. Press ENTER A dialog box is displayed Image 7-110 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 115: Lamps

    1. Press MENU to activate the Toolbar 2. Press → to select the Lamp item 3. Press ↓ to Pull down the Lamp menu 4. Use ↑ or ↓ to select Runtimes Image 7-112 5. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 116: Lamp Mode

    4. Use ↑ or ↓ to select Mode 5. Press → to pull down the menu 6. Use ↑ or ↓ to select the desired mode Image 7-114 7. Press ENTER A bullet shows the active mode. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 117: Clo

    60% of the maximum light output, one will be able to operate during approximately 500 hours with a constant light output, image 7-116. Relative Light Output (%) Runtime (hrs) 1000 Image 7-115 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 118: Clo Mode

    6. Use ↑ or ↓ to select Mode 7. Press → to pull down the Mode menu 8. Use ↑ or ↓ to select ON or OFF Image 7-117 9. Press ENTER A bullet shows the active setting R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 119: Clo Targets

    5. Press → to pull down the CLO menu 6. Use ↑ or ↓ to select Targets 7. Press → to pull down the Targets menu 8. Use ↑ or ↓ to select Normal Mode ... R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 120: Clo Target In Infitec

    6. Use ↑ or ↓ to select Targets 7. Press → to pull down the Targets menu 8. Use ↑ or ↓ to select Infitec Mode... Image 7-120 9. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 121: Time Of Day Target

    A dialog box is displayed Image 7-123 10.Use ←or →, the numeric keys on the remote, or the keypad to change the target value. Note: Range: 0.0 to 100.0 (i.e. %) R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 122: Linked Clo

    5. Push the → key to pull down the Dimming Control menu 6. Push the cursor key ↑ or ↓ to select Set Positions... and press ENTER to select. Image 7-124 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 123: Dimmer Presets

    4. Push the cursor key ↑ or ↓ to highlight Dimming Control 5. Push the → key to pull down the Dimming Control menu 6. Push the cursor key ↑ or ↓ to select Presets... and press ENTER to select. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 124 4. Push the cursor key ↑ or ↓ to highlight Dimming Control 5. Push the → key to pull down the Dimming Control menu 6. Push the cursor key ↑ or ↓ to select Presets... and press ENTER to select. Image 7-128 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 125: Manual Time Of Day

    5. Push the → key to pull down the Dimming Control menu 6. Push the cursor key ↑ or ↓ to select Manual Time of Day... and press ENTER to select. Image 7-130 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 126: Dimmer Limits

    6. Push the cursor key ↑ or ↓ to highlight Limits 7. Push the → key to pull down the Limits menu 8. Push the cursor key ↑ or ↓ to select CCD... and press ENTER to select. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 127 7. Push the → key to pull down the Limits menu 8. Push the cursor key ↑ or ↓ to select ECR... and press ENTER to select. Image 7-134 The ECR Limit dialog box will be displayed. Image 7-135 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 128: History

    When to reset the lamp runtime? The lamp runtime should only be reset when placing a new lamp. ARNING Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician. Necessary tools No tools.

  • Page 129: Clear Lamp Error

    A lamp failing to startup will be noticed by a low light output of the projector since the projector goes in single lamp mode. In case of a lamp error contact the local Barco authorized technician R59770324 SIM 5W 22/12/2011...

  • Page 130: Lamp Runtime Warning

    Image 7-140 5. Press ENTER A dialog box is displayed Image 7-141 6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 131: General

    1. Press MENU to activate the Tool bar 2. Press → to select General 3. Press ↓ to Pull down the General menu 4. Use ↑ or ↓ to select Pause R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 132: Freeze

    1. Press MENU to activate the Tool bar 2. Press → to select General 3. Press ↓ to Pull down the General menu 4. Use ↑ or ↓ to select Standby Timer R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 133: Desktop

    7. Press ENTER The desktop is displayed if the desktop PC is connected (see connections) Using Desktop makes only sense when using the Barco Desktop integration software. The Desktop integra- tion software is covered in the Desktop integration User Guide.

  • Page 134: Display Setup

    (number of total lines may vary in such a signal). The Full-screen synchronous representation function in the Display setup menu allows to disable this mode. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 135: Menu Bar Position

    2. Press → to select the Display setup item 3. Press ↓ to Pull down the Display setup menu 4. Use ↑ or ↓ to select Menu bar position menu 5. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 136: Status Bar Position

    The slider box function allows to display or hide the different boxes used for instance for picture settings (contrast, ...). How to reposition the slider box? 1. Press MENU to activate the Tool bar 2. Press → to select the Display setup item R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 137: Dynacolor

    DynaColor™ will eliminate channel-to-channel color variations or, in case of a single projector, force a desired color reproduction. How to define color? The CIE chromaticity diagram is one way to plot the colors the human eye can see. Image 7-154 The CIE chromaticity diagram R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 138: The Projector Color Gamut Is Defined By The Triangle Formed By The X, Y Coordinates Of Red Green And Blue

    The Common Color Gamut In a basic setup with 2 projectors, the perimeter of the Common Color Gamut is described by the 6 points of intersection of the 2 separate color gamuts. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 139: The Common Color Gamut

    Red x, y Coordinates for the red point Red L Red light output Green x, y Coordinates for the green point Green L Green light output R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 140 Recall of the values that were saved last Default desired This will result in the calculation of the desired values out of the measured values, depending on the Brilliant Color mode setting R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 141: Enabling Dynacolor

    2. Press → to select the Display setup item 3. Press ↓ to Pull down the Display setup menu 4. Use ↑ or ↓ to select Dynacolor 5. Press → to open the menu R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 142: Dynacolor Sets

    6. Use ↑ or ↓ to select Active Set 7. Press → to open the menu 8. Use ↑ or ↓ to select for example Set1 Image 7-161 9. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 143: Dynacolor Adjustments

    How to calibrate Dynacolor for projector 1 ? 1. Select Adjust Set1... (see procedure above) 2. Press Calibration in the dialog box A red test pattern is displayed. 3. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 144 7. The values are finally updated in the measured values of the Dynacolor dialog box. 8. Press Default desired to copy the measured values for red, green and blue and to calculate the secondary colors cyan, yellow and magenta. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 145: Common Color Values

    Both projectors will now operate within the same color gamut. Automatically : Link Set 1. Start up the Linked Projector menu of the Master projector 2. In the Linked Projector menu press the Link Set 1 button R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 146: Infitec Common Color Values

    The common color values are automatically calculated based on the measured values of both projectors and these calculated values are put in the Desired values of both projectors. Both projectors will now operate within the same color gamut. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 147: Color Temperature

    Depending on the type of color wheel, the contribution of the Brilliant Color Mode can be adjusted in 2 or in 4 levels: R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 148 4. Push the cursor key ↑ or ↓ to highlight Brilliant Color mode and press ENTER to select. Image 7-166 A slider box is displayed. 5. Put the slider box on the desired value Image 7-167 Image 7-168 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 149: Soft Edge

    Internal soft edges : the contour and shape can be adjusted in the projector using the soft edge edit wizard External Alpha planes : An external file is sent to the projector and is memorized. This file contains data corresponding to the shape contour of the soft edge R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 150: Soft Edge Adjustments

    This high number of adjustment points allow to meet any complicated soft required for special curved screens. The default soft edge size (prior to the adjustment) corresponds to 12.5% of the image. Image 7-171 Soft edge : adjustment points R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 151: Soft Edge : Points Numbering, Top And Bottom Side Edges

    6 will only affect the adjusted point (called local points). The image below shows the levels in the left side soft edge zone. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 152: Accessing The Soft Edge Menu

    2. Press → to select Display setup 3. Press ↓ to pull down the menu 4. Push ↓or ↑ to select Soft edge 5. Push the → key to pull down the menu. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 153: Soft Edge Edit

    When entering the Edit mode, the Edit dialog box is displayed. Description of the Edit dialog box An intuitive user interface is used to perform all the Soft edge adjustments. Image 7-177 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 154: The Soft Edge Edit Modes

    Edit mode : allows to select the desired control (edit box, ...) in the dialog box. • Change mode : allows to change the values in the edit boxes of the dialog box. Image 7-178 Image 7-179 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 155: Creating/Editing A Soft Edge

    4. Push ↓or ↑ to select Soft edge and alpha beta planes 5. Push the → key to pull down the menu. 6. Push the cursor key ← or → to highlight Edit... R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 156 How to select the soft edge type ? The internal soft edge type is selected by default 1. Push ↓or ↑ to select the Internal check box The item is focused Image 7-183 2. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 157 The internal soft edge is selected Image 7-184 How to enable the soft edges ? 1. Push ↓or ↑ to select the desired Edges check box The item is focused Image 7-185 2. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 158 1. Push ↓or ↑ to select the desired Source check box. in this case we will perform the adjustment on a Full white background. The item is focused Image 7-187 2. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 159 The selected check box is checked and a full white image is displayed with the soft edges on the 4 sides Image 7-188 Image 7-189 How to enable the adjustment guide ? 1. Push ↓or ↑ to select the check box ON to enable the adjustment guide R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 160 7. Advanced The item is focused Image 7-190 2. Press ENTER The selected check box is checked and the guide is displayed (vertical and horizontal grey scale bars) Image 7-191 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 161 1. Push ↓or ↑ to select the hierarchy level slider box The item is focused Image 7-193 2. Use the ← and → to select the level (from 1 to 6) How to adjust the soft edge ? 1. Press Adjust R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 162 6. Use the arrows or the digits to fill in the desired x position of the selected point (in this case the left top point of level 1) 7. Press ENTER to confirm The selected point is displaced to the new position (x=100 ; Y=0). Image 7-195 8. Press BACK to exit R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 163: Alpha Planes

    6. Push the cursor key ← or → to highlight Edit... Image 7-196 7. Press ENTER A dialog box will be displayed. 8. Use the arrows to select the Alpha planes check box and press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 164: Black Level

    Both methods will allow to compensate for the typical double brightness phenomenon in the soft edge zones by increasing the brightness of the rest of the image. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 165: Internal Black Level

    4. Push ↓or ↑ to select Soft edge and alpha beta planes 5. Push the → key to pull down the menu. 6. Push the cursor key ← or → to highlight Black level... R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 166: Beta Planes

    3. Push the ↓ key to pull down the menu. 4. Push ↓or ↑ to select Soft edge 5. Push the → key to pull down the menu. 6. Push the cursor key ← or → to highlight Black level... R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 167: Blanking

    3. Push the ↓ key to pull down the menu 4. Push ↓or ↑ to select Soft edge 5. Push the → key to pull down the menu. 6. Push the cursor key ← or → to highlight Edit... R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 168: Autoimage Setup

    1. Press MENU to activate the Tool bar 2. Press → to select the Display setup item 3. Press ↓ to Pull down the Display setup menu 4. Use ↑ or ↓ to select AutoImage setup R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 169: Sync Variance Limit

    2. Press → to select the Display setup item 3. Press ↓ to Pull down the Display setup menu 4. Use ↑ or ↓ to select Sync variance limit Image 7-206 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 170: Installation

    5. Press → to pull down the EDID menu 6. Use ↑ or ↓ to select the desired EDID file Image 7-208 7. Press ENTER The active selection is indicated by a white bullet R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 171: Internal Patterns

    The projector is equipped with different internal patterns which can be used for adjustment purposes. Geometry adjustments can not be used on these internal patterns. • Outline Image 7-209 Outline • Hatch Image 7-210 Hatch • Color bars Image 7-211 Color bars R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 172: Checkerboard

    Checkerboard Image 7-212 Checkerboard • Full white • HGBWS Image 7-213 HGBWS • Character set • H-pattern Image 7-214 H pattern • Convergence Image 7-215 Convergence • ANSI • Focus • R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 173: Purity

    5. Press → to Pull down the menu 6. Use ↑ or ↓ to select the desired internal pattern 7. Press ENTER The active selection is shown with a white bullet R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 174: Scaled Patterns

    1. Press MENU to activate the Tool bar 2. Press → to select the Installation menu 3. Press ↓ to Pull down the menu 4. Use ↑ or ↓ to select Scaled Patterns R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 175: Formatter Patterns

    1. Press MENU to activate the Tool bar 2. Press → to select the Installation menu 3. Press ↓ to Pull down the menu 4. Use ↑ or ↓ to select Formatter Patterns R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 176: Color Wheel Index

    2. Push the cursor key ← or → to highlight Installation in the menubar. 3. Push the ↓ key to pull down the Installation menu. 4. Push the cursor key ↑ or ↓ to highlight Color Wheel Index and press ENTER to select. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 177: Service

    Lamps and power supply : lamp temperature and power related failures are logged and can be checked at any time. How to display the I C diagnostics menu ? 1. Press MENU to activate the Tool bar 2. Press → to select the Service item R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 178 4. Use ↑ or ↓ to select Diagnostics 5. Press → to pull down the menu 6. Use ↑ or ↓ to select Lamps and power supply and press ENTER Image 7-227 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 179: Board Identification

    1. Press MENU to activate the Tool bar 2. Press → to select the Service item 3. Press ↓ to Pull down the menu 4. Use ↑ or ↓ to select Board identification... Image 7-229 5. Press ENTER R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 180: Option Key

    4. Use ↑ or ↓ to select Option key... Image 7-231 5. Press ENTER A dialog box is displayed Image 7-232 6. Fill in the key by using the digit and the arrow keys R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 181: Dimming

    4. Push the cursor key ↑ or ↓ to highlight Dimming 5. Push the → key to pull down the Dimming menu 6. Push the cursor key ↑ or ↓ to select Calibrate CCD... and press ENTER to select. Image 7-233 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 182 2. Use the arrow keys on the RCU to highlight the double right arrow button for Dimmer 1. Image 7-236 3. Press the double right arrow key until the dimmer appears on the top edge of the screen. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 183: Press The Double Right Arrow Key Until The Dimmer Appears On The Top Edge Of The Screen

    5. Use the arrow keys on the RCU to highlight the double left arrow button for Dimmer 2. Image 7-239 6. Press the double right arrow key until the dimmer appears on the bottom edge of the screen. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 184: Calibration Of Ecr

    AUTION Changing the ECR settings may seriously affect the performance of projector. Only authorized Barco technicians can use this feature. If the values are incorrect, the light output may drop. AUTION Make sure the projector is equipped with an ECR dimmer inside the projector and is fitted with a Night Vision lens.
  • Page 185 ECR dimmer opens and the light output increases if you decrease the value, the ECR dimmer closes and the light output decreases 8. Continue to adjust the value until the light output on the screen drops to 5% R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 186: Resetting The Ecr

    The ECR dimmers will go to their reference positions first and then back to the desired value. This may take a few seconds. 7.11.5 Calibration of CLO sensor How to calibrate the CLO sensor ? 1. See the service manual for the complete procedure 7.11.6 Operation options Overview • AutoImage • Warning messages R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 187: Autoimage

    For safety reasons, the warning messages Lamp runtime warning and Lamp runtime exceeded will always pop up during start-up of the projector. They can only be suppressed during projector runtime. How to enable/disable Warning Messages? 1. Press MENU to activate the Tool bar R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 188: Version Table

    A dialog box is displayed showing the software versions of the different components 7.11.8 Restore factory settings What can be done ? The factory settings can be restored for : • Dynacolor • Color Wheel index • Brillant Color R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 189: Air Pressure

    1. Press MENU to activate the Tool bar 2. Press → to select the Service item 3. Press ↓ to Pull down the menu 4. Use ↑ or ↓ to select Air pressure ... Image 7-249 R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 190 5. Check the radio button Set pressure and fill in the environmental pressure (in mbar) How to set the air pressure automatically ? 1. Proceed in the same way as described above but select the radio button Use sensor instead. R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 191: Index

    File 75, 78–80 Communications copy component video delete Composite video edit configuration rename connection save power files connections geometry overview formatter patterns Connections freeze Connections overview R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 192 Using the dialog boxes PrYPb installation 16, 24, 46, 166–167, 170–172 network color wheel index Network connections settings EDID Network connections formatter patterns password patterns internal patterns Operation options Option key R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 193 Note automatic gain control Warnings gain control scaled patterns serial connection service 173, 175, 182 board identification warning messages CLO sensor calibration diagnostics Service 173, 182 Operation options settings default R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...
  • Page 194 Index R59770324 SIM 5W 22/12/2011 Downloaded From projector-manual.com Barco Manuals...

  • Page 195: List Of Images

    Use the fine adjustment buttons to move the dimmer back until it is no longer visible ......180 R59770324 SIM 5W 22/12/2011...

Table of Contents